Who all has USB outlets in their QS6, QS8 or QS10? According to the LivinLite QS6 standard options I'm supposed to have one, but I don't.
I wonder how difficult it would be to add one?
Thanks,
John
Hi, I have in my camplite a "Charging station" It has USB and 12V lighter plugs it came like that from the factory
This was a new option starting this year. Chances are they added it shortly after yours was built.
[quote source="/post/4158/thread" timestamp="1412793117" author="@paul"]Hi, I have in my camplite a "Charging station" It has USB and 12V lighter plugs it came like that from the factory[/quote]Would it be possible for you to take a picture of the "charging station" so I can see what it looks like? My QS6 has a single outlet with a 12v lighter plug in it. I'm wondering if it would be as simple as finding an outlet with a 12v lighter plug / USB combo and replacing my current 12v lighter plug outlet with the combo?
Thanks,
John
[quote source="/post/4169/thread" timestamp="1412803820" author="@qs6"][quote source="/post/4158/thread" timestamp="1412793117" author="@paul"]Hi, I have in my camplite a "Charging station" It has USB and 12V lighter plugs it came like that from the factory[/quote]Would it be possible for you to take a picture of the "charging station" so I can see what it looks like? My QS6 has a single outlet with a 12v lighter plug in it. I'm wondering if it would be as simple as finding an outlet with a 12v lighter plug / USB combo and replacing my current 12v lighter plug outlet with the combo?
Thanks,
John[/quote]Here's a picture:
[attachment id="402" thumbnail="1"]
I checked it out when they first came out (I don't have one) and wasn't that impressed once I saw it since they install it right next to the stove on the 21BHS >:(
Here's the manufacturer:
http://www.sigmaswitches.com/
It appears that they sell to OEM's only, but LivinLite might be able to sell you one.
That looks pretty nice.
With my new power converter, I have a few extra 12VDC circuits and I plan to install this:
http://www.amazon.com/Blue-Sea-Systems-Charger-Socket/dp/B0082CXEI8/
It should be pretty easy to do yourself if you have a circuit available. He other option would be to get a 12VDC multiport adapter and install a USB adapter in one, along the lines of these:
http://www.amazon.com/EZOPower-4--Car-Charger-Duplicator/dp/B00862TYYM/
Thanks for the photo tinkeringtechie. I might reach out to LivinLite directly and see if they would be willing to sell me a "charging station". Would be nice if LivinLite would sell all their RV accessories directly from their website like some manufacturers do.
Thanks for the additional links subaruwx. I like the Blue Sea Systems Dual USB Charger Socket. Very clean design and I do have extra 12v circuits available.
Just found this dual USB charger plus voltmeter. I've got an 12V 80AH battery on the front of my QS6. Could be nice to always know how much battery life I've got left.
(http://ecx.images-amazon.com/images/I/51Tpu9w6rjL.jpg)http://www.amazon.com/Charger-Voltmeter-Jumper-Motorcycle-tplt/dp/B00LDSZQOI/ref=pd_sbs_misc_5?ie=UTF8&refRID=1ZGZDXFW0T09G4V8QSG5
I like that one even better! New item for my wish list.
[font size="3"]Thoughts for USB in QSx:
[ol type="decimal"][li]Consider this alternate multi-use panel. It adds a 12V socket to the USB and voltmeter functions. [a href="http://www.amazon.com/Digital-Voltmeter-DC12V-Power-Socket/dp/B00MODXVO8/ref=pd_sim_sbs_misc_5/189-9222582-8784212?ie=UTF8&refRID=07Q8D5T85YD8E1DFD26Q"]LINK[/a] [/li][li]Wire the panel directly to an an unused fuse slot on the power panel with #12 AWG wire. Do not connect to existing 12V wiring. The reason for this is to minimize voltage drop and to provide measurement of the battery as directly and accurately as possible.[/li][li]Qs6 and Subaruwx : Good finds and good luck. I'm a big fan of BlueSea products. Got lots of them in my 21RBS.
[/li][/ol]
[/font]
You may also think about putting an in line momentary switch for the voltmeter. Maybe its just me but I wouldn't need or want the meter on all the time.
-Sean
[quote source="/post/4182/thread" timestamp="1412862547" author="@admin"]You may also think about putting an in line momentary switch for the voltmeter. Maybe its just me but I wouldn't need or want the meter on all the time.
-Sean[/quote]I was thinking the same thing. Even the USB chargers have a constant draw when not in use. I prefer to use regular 12V sockets and just plug in a USB charger. That way I can remove it so there isn't any current draw. The Blue Sea USB charger for example uses 15mA even when nothing is plugged in. Not a huge deal, but I would expect the other brands to be as bad or worse.
I didn't know that - I assumed nothing connected to the USB would draw no amps. I might have to read up on 12VDC switches... Any good references?
[quote source="/post/4202/thread" timestamp="1412901428" author="@subaruwx"]I didn't know that - I assumed nothing connected to the USB would draw no amps. I might have to read up on 12VDC switches... Any good references?[/quote][p]You can check what all your chargers and such actually draw when you think they are off with a Kill-a-Watt. Tedious, but informative.[/p][p]
[/p][p]Harbor Freight sells a knock-off for about the same price, so go for the original IMO.
[/p]
Here is mine it is on the cabinet over the cook top and sinc on the side of the bed near the tv bracket
[a href="http://s1329.photobucket.com/user/paulandre88/media/Mobile%20Uploads/IMG_20141010_193355_zpsdqfksql5.jpg.html"]
(http://i1329.photobucket.com/albums/w548/paulandre88/Mobile%20Uploads/IMG_20141010_193355_zpsdqfksql5.jpg)
if you are thinking about upgrading the stereo, you could choose a model with the usb in on the back (many digital media receivers have them), and then hood up a remote usb adapter to place the plugs where you want. this way you can charge and also use it as an input, which allows you to play the files off of a thumb drive, phone, mp3 player, etc.
i used this one so i would have both 3.5mm and usb inputs. the use port charges and plays
http://www.amazon.com/VIMVIP-Mount-Installation-Extension-Waterproof/dp/B00REFOB6S/ref=sr_1_7?ie=UTF8&qid=1428370115&sr=8-7&keywords=usb+extension+2+plug
(http://ecx.images-amazon.com/images/I/61sGpEJVmuL._SL1000_.jpg)
My 6.0 has two USB ports directly above the 12 volt socket. All on the same plate.
[p]
[attachment id="714" thumbnail="1"]
This is simular to what i have, it fits right over the stock outlet and provides surge protection as well as usb charging. Can get it at your local Wally World.[/p]
[quote source="/post/9107/thread" timestamp="1428678996" author="@fjrob"][p]
This is simular to what i have, it fits right over the stock outlet and provides surge protection as well as usb charging. Can get it at your local Wally World.[/p][/quote]Those are great, I will probably install one on the outlet under our tip-out bunk, but they only will charge when you have AC hookup...
Yes they are great but I'm thinking about relocating the factory outlet a little higher on the cabnet or maybe next to the outlet by the one for the A/C. I just dont like it so far down by the floor when the sink is sitting above it.
I was thinking about adding a outlet on the upper part of my cabinet just the other day. I figure if I do it, then I'm going to install one of the outlets that has built in USB ports. They will only work on AC power but thats fine by me. Now the tricky part is dealing with the fact that the upper cabinet drops to the floor for packing, but I think I have a slick way of doing it.
I recently used the high amperage quick connect terminals on a 12v project. This things are the same terminals used to quickly power a automotive winch, and are rated at 50 amps. They should be able to handle a single 120v circuit at 15 or so amps. Here is the first one I found at amazon: http://www.amazon.com/Driver-Battery-Connect-Recovery-Products/dp/B00FXWLD88/ref=sr_1_3?ie=UTF8&qid=1428696296&sr=8-3&keywords=12v+quick+disconnect. They are all basically the same. Wire those up with the hot and neutral lines, and then maybe a separate ground if there is no good local grounding location. These keep the terminals protected when not in use and have a firm, positive connection when needed. Now I just have to figure out where I want the outlet to be.
-Sean
[quote source="/post/9135/thread" author="@admin" timestamp="1428696480"]I was thinking about adding a outlet on the upper part of my cabinet just the other day. I figure if I do it, then I'm going to install one of the outlets that has built in USB ports. They will only work on AC power but thats fine by me. Now the tricky part is dealing with the fact that the upper cabinet drops to the floor for packing, but I think I have a slick way of doing it.
I recently used the high amperage quick connect terminals on a 12v project. This things are the same terminals used to quickly power a automotive winch, and are rated at 50 amps. They should be able to handle a single 120v circuit at 15 or so amps. Here is the first one I found at amazon: http://www.amazon.com/Driver-Battery-Connect-Recovery-Products/dp/B00FXWLD88/ref=sr_1_3?ie=UTF8&qid=1428696296&sr=8-3&keywords=12v+quick+disconnect. They are all basically the same. Wire those up with the hot and neutral lines, and then maybe a separate ground if there is no good local grounding location. These keep the terminals protected when not in use and have a firm, positive connection when needed. Now I just have to figure out where I want the outlet to be.
-Sean[/quote]How about mounting a normal duplex outlet to the top of the permanent cabinet with an extension cord going to the back of your new outlet on the moveable part? Just unplug it when you fold it down.
I have been pondering the extra usb chargers also. I often wake up before the rest of the family and it is nice to just read the news while laying in bed. Seems like a usb charger hooked up to the stock lights that come with a quicksilver would a great spot to charge your phone next to bed. I took out the original bulbs and replaced them LEDs so you would think there would be enough power to share for light and charger.
[p]Am presently looking for a device shelf to build this into: [a href="http://www.amazon.com/gp/product/B00L34ARD2/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1"]http://www.amazon.com/gp/product/B00L34ARD2/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1[/a][/p][p]
[/p][p]It's got a power button and can source quite a load of devices. The shelf will go hardwired by the bed on the fridge wall. We have 5 devices to charge including some 18650 batteries. Tends to get like a jungle.[/p][p]
[/p][p]I like to use the premium version of this from time to time just to see the charging rate of individual devices. http://www.amazon.com/PortaPow-Monitor-Version-Multimeter-Chargers/dp/B00NTU18KY/ref=sr_1_cc_1?s=aps&ie=UTF8&qid=1428720087&sr=1-1-catcorr&keywords=portapow[/p]
All some pretty good ideas, share your results when you all are finished. Interested in seeing if the quick connect terminal works out.
Light with 12volt charging.
This was easy cheesy, go to autozone get blue 18 gauge wire splicers and cigarette lighter. I guess it was a total of $8.
Tested it on air pump. Pump worked great with light on at the same time.
By the way I have LED light installed instead of the stock light.