Seems I have an issue with my cover. Last fall I covered my trailer with a tarp. When I took it of this spring it looks like the coating has melted or shifted in several spots. Is there any way to repair this other than replacing the cover? Is there a waterproof spray or liquid that would fix this?
Another user reported that they used plastidip to refinish their cover. Amazon link for reference: http://amzn.to/2bGFCyQ
I've had it on my list of things to do but havent had the time. It seems like Plastidip would be a good option because it remains flexible when dry. I would also note that I havent seen any long term report of how it holds up but it might be worth a look.
-Sean
Here's the original post http://livinlite-owners.com/thread/142/fix-cracked-faded-tonneau
Next time I recoat I may try Flex Seal in the paintable version and roll it on http://flexsealproducts.com/product/liquid/
The plastidip works for awhile but didn't hold up as well as I thought it would because spraying it on it comes out a little thin. I think that by rolling on the the Flex Seal it will be thicker and hold up better.
gallon to gallon plasti dip is cheaper: http://amzn.to/2bAUwJT
Thanks. I will look into that as it is cheaper than a new cover
My name is Taylor and I am with a dealership called Moore Custom Trailers and we handle part orders from Livin'Lite. I would be able to help you look into a New Cover at a reasonable price. Contact our office at 574-773-4171 with any questions, we would love to hear from you!
Quote from: @moorecustomtrailers" source="/post/24658/thread" timestamp="1474037001My name is Taylor and I am with a dealership called Moore Custom Trailers and we handle part orders from Livin'Lite. I would be able to help you look into a New Cover at a reasonable price. Contact our office at 574-773-4171 with any questions, we would love to hear from you!
Are you serious? Take it to a PM.
I've reached out to the account I'm not going to allow the forum to turn into a sales site.
Is plasti dip flexible enough to roll the top, like in colder weather?
btw, how much is a new Tonneau cover for a qs10? Our's is really looking bad. When it's dewey or rains, some goopy dirty streaks run down the side. I'm afraid it has lost it's coating.
I've used plasti dip in other applications and it is very flexible when dry. Its like painting on a latex glove in my experience. However I've never used the liquid paint on type, I've only used rattle cans and in my applications it always takes several coats to get acceptable coverage.
So we picked up our (new to us) 2013 8.1 over the weekend and the cover is in pretty bad shape. For the past few years, it's been garage stored, but was obviously kept outside at some point. When we rolled it up as we removed it, you could almost feel the creases turning into cracks – it felt so brittle. Fortunately, it was lightly used and the interior is like new. I like the idea of using plasti dip to get a season or two out of it, but has anybody had one fabricated out of a more durable material than the factory cover? Like maybe Sunbrella or Rhinotex or even a waterproof cotton duck (though shrinkage might be an issue)? Our Springbar cotton canvas tent has spent ages in the sun over the past 18 years and has been in more storms than I can remember. And aside from tree sap stains, it looks new and has never leaked.
I've emailed a local LL dealer about the replacement cost of the factory cover, but it seems I saw someone here was quoted around $400 at some point.
If anybody here has had one made out of more robust material, I'd love to hear about it. I'm completely new to trailer camping, but I think even in our smallish city in the southwest corner of Indiana we have a few places that fabricate boat covers or awnings. Would that be the best place to start to see about having one custom made? Anybody do this? Any advice?
UPDATE: I was just quoted $249 plus freight and tax for the factory cover from our local dealer. Still seems steep for what it is - especially if it will need to be replaced every 3-4 seasons.
ours( 10.0) was dry, brittle and faded right on the dealer lot...and has gone downhill from there. I plan to get a new one but I do wonder if it could be custom made out of a better material. Our trailer looks new and great until that thing rolls out over the top..
When the time comes for a replacement for my 6.0, I'll have an awning shop make one for me. Also, if you have it made slightly taller, you'll have room for your tarps and awning. I also carry a rake under mine, along with sections of pvc pipe I use to prop up a large tarp for rainy day camping.