So the 6.0 is small, no doubt about it, but that doesn't mean you have to sacrifice functionality for compactness. With that, I built this workstation (i.e., bar :P ) / camp kitchen which nicely packs up within the trailer.
[attachment id="1535" thumbnail="1"]
[attachment id="1534" thumbnail="1"]
[attachment id="1536" thumbnail="1"]
Drawers underneath are Tupperwear with some aluminum L channel riveted to it. L channel rides in a slot in wood guides.
[attachment id="1537" thumbnail="1"]
[attachment id="1538" thumbnail="1"]
Legs are from a portable sawhorse and are adjustable for height. Handy when on uneven ground. Legs fit into square slots on the bottom.
[attachment id="1539" thumbnail="1"]
[attachment id="1540" thumbnail="1"]
Top pieces are kept in place by tap washers screwed in each corner.
[attachment id="1541" thumbnail="1"]
To put away, remove legs, top pieces, and drawers. Place shell in trailer. Drawers go into the empty space on the right side.
[attachment id="1542" thumbnail="1"]
Top pieces go back on.
[attachment id="1543" thumbnail="1"]
Slotted pool noodles in the corners to keep everything from shifting.
[attachment id="1544" thumbnail="1"]
And, with couch folded down, you still have lots of room to store other items.
[attachment id="1545" thumbnail="1"]
Dimensions are 56" x 18" x 8" high, all carefully designed to fit within the trailer while being functional outside. When outside, this fits perfectly between the side table and the awning pole.
Hope this helps anyone wanting to build something similar!
VERY nice work.
If you did this with marine grade plywood and poly varnish, it might be a good base for a fish cleaning station/bar.
Great work! It looks to be perfect for its purpose and I bet it will make setting up camp a lot easier.
[font size="3"]Well conceived, well designed, well planned, and well executed. That's engineer speak for great job!
[/font]
wow! I'm inspired...but, doubtful I have your fabrication talents.
Awesome! Next time I'm at Home Depot I'm going to have to look for those sawhorse legs. Are they sold as part of a complete sawhorse - or just the legs?
They're from a complete sawhorse, I just scavenged the legs.
https://www.homedepot.ca/en/home/p.adjustable-folding-saw-horse.1000412390.html
If you didn't want to make the square slots for the legs, you could just as easily bolt them to the sides, it would just take a little longer to set up / take down.
What a great project. I really like it. May have to permanently borrow some of your ideas for my QS6.0.
Great work. I'm looking at the 6.0 as a possible buy, and will definitely be using your idea for a kitchen. Looks perfect. Well designed and built.
Very, very nice!!