Final say on WDH

[jtelles3993]

At the end of our 8000 mile trip this year the cone on our Andersen became very noisy when making low speed turns, as is typical while positioning at camp sites. Andersen sent us a new one for free on a single phone call. Swapping it out was fairly simple and the original cone was still functional, so barring the noise, it would have kept doing it's job for a long long time. In fact, I don't think the cone will ever actually "fail". I chose Andersen for 2 reasons - weight and design. It only weighs 60lbs and by design all of its WD forces are applied horizontally in line with the TV, which I felt would address the coupler concern. I've towed with and without the hitch with my F150 and it's a much smoother, more solid and confident experience with the Andersen. But it's good to know I don't have to use it, should something break.

[charliem]

[quote source="/post/14660/thread" timestamp="1440767598" author="@surfsup"]I've towed with and without the hitch with my F150 and it's a much smoother, more solid and confident experience with the Andersen. But it's good to know I don't have to use it, should something break.
[/quote][font size="3"]You make my point that, even with a full sized truck, you may not need it, but you'll want it. Thank you. [/font]

[gbpack]

We will be getting an Anderson WDH when we receive the CL 21BHS that we are about to order. Is there a certain model of Anderson WDH that we should ask for or make certain they install?  

[daplumbr]

Andersen makes several models of their "No Sway-No Bounce" WDH. The dealer will need to order for the correct ball size, the correct ball drop/rise, and the correct bracket size for your TV/trailer combo. That's all very easy and only done once on set up. They make a universal bracket with lots of adjustment and the ball mount has several adjustment holes too. I had to notch the propane tank holder plastic about an inch to accommodate the brackets. I also had to add 2 links on both sides to make the chains long enough. After initial installation it's very easy to use. We've got about 1200 miles on ours and are still smiling at the smooth ride (we didn't need the WDH feature, just the bounce/sway control). 

[ammobob]

[quote source="/post/14672/thread" author="@gbpack" timestamp="1440796764"]We will be getting an Anderson WDH when we receive the CL 21BHS that we are about to order. Is there a certain model of Anderson WDH that we should ask for or make certain they install?  [/quote]I think you can get a way with the 3324. 4" inch drop/rise and 2" ball. The 3350 model is for the 2 5/16" ball with 4" drop/rise. Based on the 21BHS and your Jeep the 3324 will work unless you change (or have it changed) out the coupler to 2 5/16" ball.

 If you buy it and plan on installing yourself get some extra links so you don't have to move your propane tanks. I added a D link and 3 links of chain to each side of mine.

If you are buying it from your dealer they will know which one you need and install it.

[gbpack]

Thanks guys. We will be purchasing the Anderson WDH/sway control from the dealer and have them install it. Appreciate your responses and advice. Will let you know how it all goes, but it will probably be a couple months from now!

[gbpack]

We are close to receiving delivery on our CL 21BHS and I need to order the Andersen WDH myself because our dealer doesn't carry it. The dealer will install it but it will be cheaper for me to buy it online than for hi to order it (and mark up the cost). I believe that our trailer will be equipped with the larger coupler, which will require a 2-5/16" ball. According to Ammobob, we should then order the Andersen 3350. Is that correct? Will the frame brackets that come with the 3350 be the right size for the frame on our 21BHS? Lastly, can someone please tell me the size of the frame on the 21BHS? Thanks!

[tinkeringtechie]

[quote source="/post/16612/thread" timestamp="1447456136" author="@gbpack"]We are close to receiving delivery on our CL 21BHS and I need to order the Andersen WDH myself because our dealer doesn't carry it. The dealer will install it but it will be cheaper for me to buy it online than for hi to order it (and mark up the cost). I believe that our trailer will be equipped with the larger coupler, which will require a 2-5/16" ball. According to Ammobob, we should then order the Andersen 3350. Is that correct? Will the frame brackets that come with the 3350 be the right size for the frame on our 21BHS? Lastly, can someone please tell me the size of the frame on the 21BHS? Thanks![/quote]I used the 3350 with my 21BHS, BUT it originally came with a 2" ball and I swapped out the coupler. You should verify that your 21BHS is coming with a 2 5/16" ball before ordering it. I believe the frame is 4" tall, which works well with that WDH.